CRS-CPT05銅箔抗剝離強度測試儀(Copper Foil Peel Strength Tester)按IPC-TM-650試驗方法手冊中的2.4.8和2.4.9設計制造，專業用于覆銅層壓板和印制線路板工業的實驗室外中測量柔性板和剛性板上銅箔的抗剝離強度。是PCB廠家選擇的**佳產品。結構簡單、操作方便，可放置于工作臺上進行試驗。其采用電子控制系統，經調速器控制調速馬達轉動，再經過變速機械機構減速后驅動T型絲桿副帶動橫梁上升與下降，來完成試樣的拉伸或壓縮試驗。力值由推拉力計反饋顯示，試驗速度實時顯示。本機可用于測試材料、成品、結構物之拉伸、壓縮、撕裂、剝離強度等，廣泛應用于電線電纜、塑料薄膜、橡膠制品、紡織皮革、服裝鞋業、汽車配件、五金配件等多種行業，是品質管理、物性試驗之基本設備。
The design and manufacture of copper foil peel strength tester (Copper Foil Peel Strength Tester) 2.4.8 and 2.4.9 of IPC-TM-650 Test Methods Manual professional for copper-clad laminates and printed circuit board industries experimentaloutdoor measuring the peel strength of the flexible sheet and the rigid panel of copper foil. PCB manufacturers to choose the best products. The structure is simple, easy to operate, and can be placed on the work bench trial. The use of electronic control systems, the governor speed control motor rotation, and then, after the shift mechanical reducer drive beams rise and fall of the T-screw vice driven to complete the tensile or compression tests. Force value by pushing or pulling force feedback, the test speed real-time display. The machine can be used to test materials, finished products, tensile structures, compression, tearing, peeling strength, widely used in wire and cable, plastic film, rubber products, textiles and leather, clothing footwear, automotive accessories, hardware accessories and more the seed industry, quality management, physical property test of basic equipment.

一．主要技術指標

1. **大試驗力：50 N  力表能力：可選擇0-1kg，0-5kg，0-10kg，0-15kg的力表。

2. 分辨率：0.01N 

3. 測試誤差：±0.5%

4. 剝離速度：50mm/分（2"/分）

5. 試驗行程：100mm

6. 速度精度：±1%

7. 測試方式：電子控制，點動/自動切換

8. 電源：220V

9. 外形尺寸：310*410*500mm（W×D×H）

10. 凈重：16kg

11. 專業用于測量剛性覆銅板上的銅箔抗剝離強度，配備剛性試樣夾具小臺車
★.The main technical indicators

1.maximum test force: 500 N force table capacity: selectable 0-1kg ,0-5kg ,0-10kg ,0-15kg of force table.

2.Force value Resolution: 0.01N
3.Test error: ± 0.5%
4.Peel speed: 50 mm / min (2 "/ min)
5.Experimental stroke: 100 mm
6.Speed accuracy: ± 1%
7.Test ways: electronically controlled, jog / automatic switching
8.Power supply: 220V
9.Dimensions: 310 * 410 * 500 mm (W × D × H)
10.Net weight: 16kg
11. Professional for measuring rigid laminate foil peel strength on with rigid specimen holder trolleys as well as flexible specimen holder

二．主要功能與特點

1.力值數字液晶顯示，可辨別拉力或壓力，液晶界面清楚易讀 ；

2.負荷瞬間值、負荷峰值保持、負荷峰值延時保持三種顯示模式；

3.三種計量單位：N-Kgf-Lbf可選并能自動互換；

4.負荷上下限值設定，可執行GO、NG的判定；

5.液晶顯示帶背光照明，可在光線不足的環境中使用；

6.負荷超載有蜂鳴警報、指示燈變紅、屏幕顯示三種方式警示；

7.單次測定，即可讀取拉、壓兩個方向的峰值，并可自動和手動清零；

8.帶行程限位及過載停機功能。
    9.采用USB數據連接線，可與電腦聯接使用，使用軟件進行統計分析及拉力圖表即時顯示。
★.Main functions and features
1.The force value digital LCD discernible tension or pressure, liquid crystal interface is clear and easy to read;
2.Load instantaneous value, the load peak hold, the load peak delay maintain the three display modes;
3.Three units of measurement: N-Kgf-Lbf optional and can automatically interchangeable;
4.The load of the upper and lower limits set executable GO, NG judgment;
5.LCD with backlight, can be used in low-light environments;
6.Overload buzzer alarm indicator light turns red, the screen shows three ways Alerts;
7.Single determination, you can read pull peak pressure in both directions, and can automatically and manually cleared;
8.With stroke limiter and overload shutdown feature.
9.USB data cable can be connected with computer use, the use of software for statistical analysis and Rally chart real-time display.